Sony XP-SR320 Connecting To An External Unit → U, Charge, Erasing all of the presetting, Stop/Off

1	BAND/	2
	TUNER ON

3 ENTER/DISP

T

STOP/OFF

CHARGE 1

to tune in to a station.

4Press ENTER/DISP to preset the station on the selected preset number. If the flashing stops, repeat the procedure from step 2.

Erasing the presettings one by one

Press sSTOP/OFF/CHARGE after step 2 in “Changing the presetting” above. Each preset station is erased. All the settings move up by ones and the preset numbers are refreshed.

Erasing all of the presetting

Keep ENTER/DISP pressed, then press BAND TUNER ON when the frequency and preset number starts flashing.

CONNECTING TO AN EXTERNAL UNIT → U

Use a commercially available connection cord which has a 3.5 ø stereo mini- plug at one end and two phono plugs at the other end.

Connect the stereo mini-plug to the PHONES/LINE OUT jack of the unit and connect the phono plugs to the analog input terminals of the external unit, such as the amplifier or the equipment with the built-in amplifier.The CD sound can be heard through the connected audio system.

U

2

LINE IN CD IN AUX

Note

•Turn off the power of both units before connection.

•DO NOT connect to the PHONO inputs of an amplifier (with a built-in phonoequalizer-amplifier).

•Adjust the volume and DSL on this unit.

R L

PHONES/

LINE OUT

01.3.29, 5:08 PM

XP-SR321/SR320(AU) E Page 2