Other Functions
Adjusting the Sound
Characteristics
1 Select the item you want to adjust by
pressing the | SEL | button repeatedly. |
VOL (volume) nBAS (bass) nTRE (treble) nBAL (balance) nFAD (fader)
nVOL (volume)
2 Adjust the selected item by pressing either the – or + button.
Adjust within three seconds after selecting. (After three seconds the button will again
EN serve as volume control button.)
Enjoying Bass and Treble at Low Volume
— Loudness Function
LOUD
Press the 
button. n“LOUD” will appear on the display.
Bass and treble will be boosted. To cancel, press again.
Muting the Beep Tone
Press the | 5 button while pressing | |
the | SEL | button. |
To reactivate the beep tone, press these buttons once more.
8
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one matching the amperage rating stated on the fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.
Fuse (15 A)
Warning
Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, open the front panel by pressing the RELEASE button, then detach it and clean with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connector may get damaged.
Main unit
Back of the front panel
Actual total number | Sony |
