Troubleshooting Guide

The following checklist assists in the correction of most problems which you may encounter with your unit.

Before going through the checklist below, refer to the connection and operating procedures.

General

ProblemCause/Solution

No sound

∙ Adjust the volume with the

button.

Set the fader control to the center position for 2-speaker systems.

Indications do not appear on the display.

Remove the front panel and clean the connectors. See “Cleaning the Connectors” of “Maintenance” for details.

Tape playback

Problem

Cause/Solution

 

 

Playback sound is distorted.

Contamination of the tape head. n Clean the head.

 

 

 

EN

Radio reception

Problem

Cause/Solution

 

 

Preset tuning is not possible.

∙ Memorize the correct frequency.

 

∙ The broadcast is too weak.

Automatic tuning is not possible.

The “ST” indication flashes.

The broadcast is too weak. n Use the manual tuning.

Tune in precisely.

Disc play

Problem

Playback sound skips.

Cause/Solution

A dusty or defective disc.

Error displays (with the operational CD changer(s) connected)

The following indication flashes for about five seconds.

Display

Cause

Solution

E01

E02

E04

E99

The disc magazine is not inserted in the CD changer.

No disc is inserted in the disc magazine.

The disc is dirty.

The disc is inserted upside down.

The CD changer cannot be operated because of some problem.

Insert the disc magazine with discs into the CD changer.

Take out the magazine and insert the discs.

Clean the disc.

Insert the disc correctly.

Press the reset button of the unit.

If the above-mentioned solutions do not help to improve the situation, consult your nearest Sony dealer.

14

Actual total number

Sony XR-C102 (E,F,G,I) 3-856-658-31(2)

Page 14
Image 14
Sony XR-C102 operating instructions Troubleshooting Guide, Tape playback, Radio reception, Disc play