4
EN
Detaching and Attachingthe Front Panel
The front panel of this unit can be detached in
order to prevent the unit from being stolen.

Detaching the Front Panel

Before detaching the front panel, be sure to
press the
OFF
button first. Then press the
RELEASE button to open up the front panel,
and slide the front panel a little to the left.
Then pull it off towards you.
Be sure not to drop the panel after detaching it
from the unit.

Attaching the Front Panel

Apply the right hand side of the front panel to
the unit by attaching part A of the front panel
to part B of the unit as illustrated, then swing
the left side into the unit until it clicks.
Notes
Make sure that the front panel is the right way up when
attaching it to the unit as it cannot be attached upside
down.
Do not press the front panel hard against the unit when
attaching it to the unit. It can easily be attached by
pressing it lightly against the unit.
When you carry the front panel with you, put it in the
supplied front panel case.
Do not press hard or give excessive pressure to the
display windows of the front panel.
Before removing the front panel, be sure to turn the
power off. However, if you press the RELEASE button to
detach the panel while the unit is still turned on, the
power is automatically turned off in order to protect the
speakers from being damaged.
Do not expose the front panel to direct sunlight, heat
sources such as hot air ducts or leave it in a humid place.
Never leave it on the dashboard etc. of a car parked in
direct sunlight where there may be a considerable rise in
temperature inside the car.

Caution alarm

If you turn the ignition key to the OFF position
without removing the front panel, the caution
alarm is activated and a beep tone is heard for
a few seconds.
RELEASE button
A
B