Sony XR-C453RDS Presetting the RDS stations with AF and TA data, announcements, announcements, Receiving emergency, 1 Select an FM band, Press (AF/TA) momentarily

To cancel the current traffic announcementPress (AF/TA) momentarily.

To cancel all traffic announcements, turn off the function by pressing (AF/TA) until “AF” disappears.

	Presetting the volume of traffic
	announcements
	You can preset the volume level of the traffic
	announcements beforehand, so you will not
	miss the announcement. When a traffic
	announcement starts, the volume will be
	automatically adjusted to the preset level.
	1 Select the desired volume level.
	2 Press (3) while holding down (SEL).
	“TA VOL” appears and the setting is
	stored.
	Receiving emergency
EN
	announcements
	If an emergency announcement comes in while
	you are listening to the radio, the programme
	will be automatically switched to the
	announcement. If you are listening to a source
	other than the radio, the emergency
	announcements will only be heard if you set
	AF or TA to on. The unit will then
	automatically switch to these announcements
	no matter what you are listening to at the time.

Presetting the RDS stations with AF and TA data

When you preset the RDS stations, the unit stores each station’s data as well as its frequency, so you don’t have to turn on the AF or TA function every time you tune in the preset station. You can select different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations.

Presetting the same setting for all preset stations1 Select an FM band.

2 Press (AF/TA) repeatedly and select either “AF“, “TA” or “AF TA” (for both AF and TA functions).

Note that turning the “AF TA” function off stores RDS stations as well as non-RDS FM stations.

3 Press (SENS/BTM) for two seconds.

Presetting different settings for each preset station1 Select an FM band, and tune in the desired station.

2 Press (AF/TA) repeatedly and select either “AF“, “TA” or “AF TA” (for both AF and TA functions).

3 Press the desired preset number button for two seconds until “MEM” appears.

Repeat from step 1 for presetting other stations.

Tip

If you want to change the preset AF and/or TA setting after you tuned in the preset station, you can do so by turning on/off the AF or TA function.

10