You can skip up to nine tracks at one time.
During playback, press either side of (SEEK/AMS) momentarily.To locate the succeeding tracks
SEEK
AMS
To locate the preceding tracks
Note
The AMS function may not work when :
•the blanks between tracks are shorter than 4 seconds
•there is noise between tracks
•there are long sections of low volume or quiet sections.
Changing the displayed itemsEach time you press (DSPL) during tape playback, the displayed item changes as follows:
z Tape playback zClock zFrequency*
EN * While the AF/TA function activated.
Playing a tape in various modes
Searching for the desired track—Intro scanPress (1) during playback.“INTRO” appears on the display.
The first 10 seconds of all the tracks are played.
When you find the desired track, press again. The unit returns to the normal playback mode.
Playing tracks repeatedly—Repeat playPress (2) during playback.“REP” appears on the display.
When the current played track is over, it will be played again from the beginning.
To cancel this mode, press again.
“ATA” appears on the display.
When
To cancel this function, press (5).
Skipping blanks during tape playback — Blank skipPress (6) during playback.“BL.SKIP” appears on the display.
Blanks longer than eight seconds will automatically be skipped during tape playback.
To cancel this function, press (6).
Playing a CrO2 or metal tapePress (4) when you want to listen to aCrO2 (TYPE II) or metal (TYPE IV) tape.“MTL” appears on the display.
To cancel this function, press (4).
6