Other Functions

Using the rotary remote

The rotary remote works by pressing buttons and/or rotating controls.

You can control the optional CD/MD changer by the rotary remote.

By pressing buttons (the SOURCE and the MODE buttons)

(SOURCE)

EN

(MODE)

Every time you press (SOURCE), the source changes as follows:TAPE nTUNER nCD/MD

Pressing (MODE) changes the operation in the following ways:

•the tape transport.

•the band, FM1 nFM2 nFM3 nMW nLW.

•the CD/MD changer.

Tip

You can turn on this unit by pressing (SOURCE) on the rotary remote.

By rotating the control (the SEEK/ AMS control)
Rotate the control momentarily and release it to:

•Locate the beginnings of the tracks on the tape. Rotate and hold the control, and release it to fast-wind the tape. To playback, rotate and hold the control again, and release it.

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in the stations automatically. Rotate and hold the control to tune in the specific station.

By rotating the control while pushing in (the PRESET/DISC control)Push in and rotate the control to:

•Receive the stations memorized on the preset buttons.

•Change the disc.

Other operations

Rotate the VOL control

to adjust the volume.

Press (MUTE)to mute the sound.

OFF

Press(OFF) to turn off the unit.

Press (SEL) to adjust and select.

Press (DSPL) to change the displayed items.

12