Changing the sound and display settings

The following items can be set: •CLOCK (page 6).

•BEEP – to turn the beep sound on or off. •RM (Rotary Commander) – to change the

operative direction of the rotary commander.

—Select “NORM” to use the rotary commander in the factory-set position.

—Select “REV” when you mount the rotary commander on the right hand side of the steering column.

•M.DSPL (Motion Display) – to turn the motion display on or off.

•A.SCRL (Auto Scroll)* (page 15).

1 Press (SHIFT).

2 Press (2) (SET UP) repeatedly until the desired item appears.

Each time you press (2) (SET UP), the item changes as follows:

CLOCK nBEEP nRM nM.DSPL nA.SCRL*

*When no CD or MD is playing, this item will not appear.

3 Press (4) (n) to select the desired setting (Example: ON or OFF).

4 Press (SHIFT).

After the mode setting is complete, the display returns to normal playback mode.

Note

If the “SFT” indication appears, press (SHIFT) to complete the mode setting.

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost.

You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control.

Level

D-BASS 3

 

D-BASS 2

 

D-BASS 1

0dB

Frequency (Hz)

Adjusting the bass curve

Turn the D-BASS control to adjust the bass level (1, 2, or 3).

“D-BASS” appears in the display.

To cancel, turn the control to OFF.

Note

If the bass sound becomes distorted, adjust the D-BASS control or volume.

14