Playing a tape in various modes
You can play the tape in various modes: •REP (Repeat Play) repeats the current track. •NR (Dolby NR) lets you select the Dolby* NR
B system.
•METAL (Metal) lets you play a metal or CrO2 tape.
•BL SKP (Blank Skip) skips blanks longer than eight seconds.
•ATA (Automatic Tuner Activation) turns on the tuner automatically when
*Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation.
”DOLBY“ and the
1During playback, press (SHIFT).
2Press (3) (PLAY MODE) repeatedly until the desired play mode appears.
Each time you press (3) (PLAY MODE), the item changes as follows:
REP nNR nMETAL nBL SKP nATA
3Press (4) (n) to select “ON.”
The selected play mode starts.
4Press (SHIFT).
To return to normal playback mode, select “OFF” in step 3 above.
Note
If the “SFT” indication appears, press (SHIFT) to complete the mode setting.
Radio
Memorizing stations automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 6 stations on each band (FM1, FM2, FM3, MW, SW1, and SW2).
Caution
When tuning in stations while driving, use Best Tuning Memory to prevent accidents.
1 Press (SOURCE) repeatedly to select the tuner.
Each time you press (SOURCE), the source changes as follows:
| z TUNER |
| z CD* |
|
| |
|
|
|
| |||
|
|
|
|
|
|
|
| TAPE Z |
|
| MD* Z |
| |
|
|
|
| |||
|
|
|
|
|
|
|
*If the corresponding optional equipment is not connected, this item will not appear.
2 Press (MODE) repeatedly to select the band.
Each time you press (MODE), the band changes as follows:
| z FM1 |
| z FM2 |
| z FM3 |
|
|
| SW2 Z |
| SW1 Z |
| MW Z |
| |
|
| ||||||
|
|
|
|
|
|
|
|
3 Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “B.T.M” appears.
4 Press (4) (n).
The unit stores stations in the order of their frequencies on the number buttons.
A beep sounds when the setting is stored.
8