Cassette Player

Listening to a tape

Insert a cassette.

Playback starts automatically.

If a cassette is already inserted, to start playback, press (SOURCE) repeatedly until “FWD” or “REV” appears.

The side facing up is played.

The side facing down is played.

Tip

To change the tape‘s playback direction, press (MODE) (*).

To

Press

Stop playback

(OFF)

Eject the cassette

6

 

 

Fast-winding the tape

During playback, push the SEEK/AMS control up or down and hold.

SEEK / AMS

Fast-forward

Rewind

To start playback during fast-forwarding or rewinding, press (MODE) (*).

Locating a specific track

—Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS control up or down and release, for each track you want to skip.

You can skip up to nine tracks at one time.

SEEK / AMS

To locate succeeding tracks

To locate preceding tracks

Note

The AMS function may not work when:

—the blanks between tracks are shorter than four seconds

—there is noise between tracks

—there are long sections of low volume or quiet interludes.

Changing the display item

Each time you press (DSPL), the item changes as follows:

 

z Tape playback

 

z Clock

 

 

 

 

 

 

Frequency* Z

 

 

 

 

 

 

*While the ATA function is activated.

After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds.

In the Motion Display mode, all the above items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 14.)

7