Sony XR-C7200, XR-C7200W Muting the sound, Changing the sound and display settings, Adjusting the sound characteristics, 4 Press (SHIFT), 1 Press (SHIFT), then press (2) (SET UP)

Press (SOUND) two seconds while pushing the VOL control.

Tip

You can change the operative direction of controls with the unit, refer to “Changing the sound and display settings”.

You can adjust the bass, treble, balance and fader.

Each source can store the bass and treble level respectively.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nBAS (bass) nTRE (treble) n BAL (left-right) nFAD (front-rear)

2 Adjust the selected item by rotating the dial.

Adjust within three seconds after selection. (After three seconds, the dial works as the volume control dial.)

The unit decreases the volume automatically when a telephone call is received (Telephone- mute function).

You can set:

•Clock (page 5)

•D. Info (Dual Information) to display the clock and the play mode at the same time (ON), or to display the information alternately (OFF).

•Amber/Green to change the illumination color to amber or green.

•Dimmer to change the brightness of the display.

—Select “Auto” to dim the display only when you turn the lights on.

—Select “on” to dim the display.

•Contrast to adjust the contrast if the indications in the display are not recognizable because of the unit’s installed position.

•Beep to turn on or off the beeps.

•RM (Rotary Commander) to change the operative direction of the controls of the rotary commander.

—Select “norm” to use the rotary commander in the factory preset position.

—Select “rev” when you mount the rotary commander on the side right of the steering column.

•Loud (Loudness) to enjoy bass and treble even at low volume. The bass and treble will be reinforced.

•A. Scrl (Auto Scroll) (page 12)

Note

The displayed item will differ depending on the source.

1 Press (SHIFT), then press (2) (SET UP).

2 Press (2) (SET UP) repeatedly until the desired setting mode appears.

Each time you press (2) (SET UP), the item changes as follows:

Clock nD.Info nAmber/Green nDimmer n Contrast nBeep nRM nLoud nA.Scrl

3 Press (4) (n) to select the desired setting (for example: “on” or “off”).

For the “Contrast” setting, pressing (4) (n) makes the contrast higher, and pressing (1) (N) makes the contrast lower.

4 Press (SHIFT).

When the mode setting is complete, the normal playback mode appears.

Functions Other