Sony XR-C7200, XR-C7200W Playing a CD or MD, Scanning the tracks, CD/MD Unit, to skip, CD or MD, — Intro Scan, — Auto Scroll, 3 Press (SHIFT), — Manual Search, 3 Press (SHIFT)

With Optional Equipment

CD/MD Unit

Playing a CD or MD

1 Press (SOURCE) repeatedly to select theCD or MD.

2 Press (MODE) until the desired unit indication appears in the display. CD/MD playback starts.

Changing the displayed item

Each time you press (DSPL) during CD/MD playback, the item changes as follows:

			$
		Elapsed	playback time
			$
		Disc	name*1
EN			$
		Track	name*2
		$
		Clock
*1	If you have not labeled the CD, “NO Name” appears in
	the display. If there is no prerecorded name for an MD,
	“NO D. Name” appears in the display.
*2	If the track name of an MD is not prerecorded, “NO T.
	Name” appears in the display.

Tip

If the name of the MD is too long, you can scroll it across the display by pressing (SHIFT), then (1) (N).

Automatically scrolling a disc name— Auto Scroll

If the disc name or track name on an MD exceeds 10 characters and the Auto Scroll function is on, the name automatically scrolls on the display as follows.

•The disc name appears when the disc has changed (if the disc name is selected).

•The track name appears when the track has changed (if the track name is selected).

•The disc or track name appears depending on the setting when you press (SOURCE) to select an MD.

If you press (DSPL) to change the display item, the disc or track name of the MD is scrolled automatically whether you set the function on or off.

1 Press (SHIFT), then press (2) (SET UP) repeatedly until “A. Scrl” appears.

2 Press (4) (n) to select “A. Scrl on.”

12

3 Press (SHIFT).

To cancel Auto Scroll, select “A. Scrl off” in step 2 above.

Displaying the recording date of the currently selected MDPress (DSPL) for two seconds during MD playback.

The recording date of the track is displayed for about three seconds.

Locating a specific track—Automatic Music Sensor (AMS)

During playback, press either side of (SEEK/AMS) once for each track you wish

to skip.

SEEK/AMS

To locate succeeding tracks

To locate preceding tracks

Locating a specific point in a track— Manual Search

During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point.

SEEK/AMS

To search forward

To search backward

Locating a disc by disc number—Direct Disc SelectionPress the number button that corresponds with the desired disc number.

The desired disc in the currently selected changer begins playback.

Scanning the tracks

— Intro Scan

You can play the first 10 seconds of all the tracks on the current disc.

1 During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “Intro” appears.

2 Press (4) (n) repeatedly until “Intro on” appears.

Intro Scan starts.

3 Press (SHIFT).

To go back to the normal playback mode, select “Intro off” in step 2 above.