Sony XR-C7200, XR-C7200W Locating a disc by name, Selecting the specific tracks for playback, — Bank/Custom File, Erasing the disc memo, Displaying the disc memo

Displaying the disc memoDuring playback, press (DSPL).

CD1 DISC NAME

SUR EQ 4 SCHUBERT

Each time you press (DSPL) during CD playback, the item changes as follows:

z Elapsed playback time		z Disc name
	Clock Z

Erasing the disc memo1 Press (SOURCE) repeatedly to select CD.2 Press (MODE) repeatedly to select the CD unit.3 Press (LIST) for two seconds.4 Press (DSPL) for two seconds.

“Delete” and the disc memo appear in the display.

EN

5 Rotate the dial to select the name you want to erase.6 Press (5) (ENTER) for two seconds. The name is erased.

Repeat steps 5 and 6 if you want to erase other names.

7 Press (LIST) for two seconds.

The unit returns to the normal CD playback mode.

Locating a disc by name

—List-up (CD unit with custom file function or MD unit)

You can use this function for the discs that have been assigned a personalized name. For more information on disc names, refer to “Labeling a CD” (page 13).

1 Press (LIST) momentarily.

The names assigned to the disc currently playing and the next disc to be played appear in the display. The name assigned to currently playing disc is flashing.

LST

SUR EQ	4 SCHUBERT
	ENTER

2 Press (LIST) repeatedly until you find the desired disc.3 Press (5) (ENTER) to play back the disc.

Notes

•To go back to the normal display, press (DSPL). Once a disc name has been displayed for five seconds, the display goes back to the normal playback mode.

•The track names are not displayed during MD playback.

•If there are no discs in the magazine, “NO Disc” appears in the display.

•If a disc has not been assigned a custom file, “********” appears in the display.

•If the disc information has not been read by the unit, “?” appears in the display. To load the disc, first press a number button, then choose a disc that has not been loaded.

•The information appears only in upper cases. There are also some letters which cannot be displayed (during MD playback).

Selecting the specific tracks for playback

— Bank/Custom File

(CD unit with custom file function)

If you label the disc, you can set the unit to skip tracks and play only the tracks you want.

1 Start playing the disc and press (SHIFT).Then press (3) (PLAY MODE) for two seconds.

Bank edit mode

CD1 DISC		TRACK
SUR EQ	2	2 Play
	PLAY MODE	ENTER

Note

If you have not labeled the disc, the bank edit mode does not appear and the program edit mode appears. To go back to the normal playback mode, press (3) (PLAY MODE) for two seconds.

2 Press either side of (SEEK/AMS) to select the track number you want to skip and press (5) (ENTER).

CD1 DISC		TRACK
SUR EQ	2	4 Skip
	PLAY MODE	ENTER

The indication changes from “Play” to “Skip.” If you want to return to “Play,” press (5) (ENTER) again.

14