Other Functions

Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

You can control the optional CD and MD changer with the rotary commander.

By pressing the button (the SOURCE button)

(SOURCE)

EN

(MODE)

Each time you press (SOURCE), the source changes as follows:

Tuner nCD nMD nTape

Pressing (MODE) changes the operation in the following ways

•the tape transport direction

•the band: FM1 nFM2 nMW nSW 1 n SW 2

•the CD unit: CD1 nCD2 n....

•the MD unit: MD1 nMD2 n....

Tip

You can turn on this unit by pressing (SOURCE) on the rotary commander.

By rotating the control (the SEEK/AMS control)

 

Rotate the control momentarily and

 

release it to:

 

•Locate the beginnings of the tracks on the

 

tape. Rotate and hold the control, and

 

release it to fast-wind the tape. To

 

playback, rotate and hold the control

 

again, and release it.

 

•Locate a specific track on a disc. Rotate

 

and hold the control until you locate the

10

specific point in a track, then release it to

start playback.

•Tune in stations automatically. Rotate and hold the control to tune in the specific station.

By rotating the control while pushing in (the PRESET/DISC control)Push in and rotate the control to:

•Receive the stations memorized on the preset buttons.

•Change the disc.

Other operations

Rotate the VOL control to adjust the volume.

Press (MUTE) to mute the sound.

OFF

Press (OFF) to turn off the unit.

Press (SOUND) to adjust the volume and sound menu.

Press (LIST) to display memorized names.

Changing the operative direction

The operative direction of controls is factory preset as in the illustration below.

To increase

To decrease

If you need to mount the rotary commander on the right of the steering column, you can reverse the operative direction of the controls.