Memorising only the desired stations

You can store up to 10 stations on each band (20 for FM 1 and FM 2, 20 for SW 1 and SW 2, 10 for MW) in the order of your choice.

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select the desired band.

3 Press either side of (SEEK/AMS) to tune in the station you want to store on the number button.

4 Keep the desired number button ((1) to(10)) pressed until “MEM” appears in the display.

EN The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

Receiving the memorized stations

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select the desired band.

3 Press the number button ((1) to (10)) momentarily where the desired station is stored.

If you cannot tune in a preset station

Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning).

Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.

Note

If the automatic tuning stops too frequently, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “Local” (local seek mode) appears. Then press (4) (n) to select “Local on.” Press (SHIFT).

Only the stations with relatively strong signals will be tuned in.

Tip

If you know the frequency of the station you want to listen to, press and hold down either side of (SEEK/AMS) for a few seconds until the desired frequency appears (manual tuning).

If FM stereo reception is poor— Monaural Mode

1 Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “Mono” appears.2 Press (4) (n) repeatedly until “Mono on” appears.

The sound improves, but becomes monaural (“ST” disappears).

3 Press (SHIFT).

To go back to the normal mode, select “Mono off” in step 2 above.

Changing the displayed item

Each time you press (DSPL), the item changes as follows:

Frequency ˜Clock

8