3 Repeat step 2 to set the “Play” or “Skip” mode on all the tracks.4 Press (3) (PLAY MODE) for two seconds.

5 Press (SHIFT).

Notes

•You can set the “Play” and “Skip” modes on up to 24 tracks.

•You cannot set the “Skip” mode on all the tracks.

Playing the specific tracks only

You can select:

•Bank on to play the tracks with the “Play” setting.

•Bank inv (inverse) to play the tracks with the “Skip” setting.

1 During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “Bank” appears.

2 Press (4) (n) repeatedly until the desired setting appears.

z Bank on z Bank inv z Bank off

CD1

BANK

 

SUR EQ

Bank on

 

 

PLAY MODE

Playback starts from the track following the current one.

3 Press (SHIFT).

To go back to the normal playback mode, select “Bank off” in step 2 above.

Additional

Information

Precautions

•If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it.

•If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse.

•If no sound comes from the speakers of a two-speaker system, set the fader control to the center position.

•If your car is equipped with a power antenna, note that it will extend automatically while the tuner function is selected.

If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.

To maintain high quality sound

If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the car audio. Sugary residues on this unit or cassette tapes may contaminate the playback heads, reduce the sound quality, or prevent sound reproduction altogether.

Cassette cleaning kits do not remove sugar from the tape heads.

EN

Information Unit/Additional CD/MD

15