10
XR-CA600/CA600V/CA600X SECTION 3ASSEMBLY OF MECHANISM DECK3-1. HOUSING
3-2. ARM (SUCTION)
Note: Follow the assembly procedure in the numerical order given.
A part
C part
B part
D part
8Hold the hanger by
bending the claw.
6 Fit projection on D part.
4 Fit claw on B part.
3Put the housing
under A part.
5 Fit projection on C part.
1 Install the catch to the hanger.
2Install the hanger onto
two claws of the housing.
7 Hold the hanger by bending the claw.
hanger
housing