During tape playback, press (MENU).

Cassette Player

Listening to a tape1 Press (OPEN) and insert a cassette.

Playback starts automatically.

2 Close the front panel.

If a cassette is already inserted, press (SOURCE) repeatedly until “FORWARD” or “REVERSE” appears to start playback.

FORWARD: The side facing up is played.

REVERSE: The side facing down is played.

ToPress

Change the tape’s (MODE) (o) playback direction

Stop playback

(OFF)

 

 

Eject the cassette

(OPEN) then Z

 

 

Skip tracks

(SEEK) (./>)

– Automatic

[once for each track]

Music Sensor

 

 

 

Fast-forward/

(SEEK) (m/M)

reverse

[hold to desired point]

– Manual Search

 

 

 

Note

The AMS function may not work when:

–the blanks between tracks are shorter than 4 seconds.

–there is noise between tracks.

–there are long sections of low volume or quiet sections.

Playing a tape in various modes

You can play the tape in various modes:

•REP (Repeat Play) the current track.

•BL.SKP (Blank Skip) skips blanks longer than 8 seconds.

•ATA (Automatic Tuner Activation) turns on the tuner automatically when fast-winding the tape.

•METAL (Metal) lets you play a metal or CrO2 tape.

1

2 Press either side of (DISC/PRESET) repeatedly until the desired mode appears.3 Press (+) side of (SEEK) to select “ON.”

Example: ATA mode

Play mode starts.

4 Press (ENTER).

To return to normal playback mode, select “OFF” in step 3.

Playing tracks repeatedly—Repeat Play

During playback, press (1) on the card remote commander repeatedly until “REP-ON” in the display appears.

To return to normal playback mode, select “REP- OFF.”

Tip

During repeat playback, press (MODE). “REP” disappears from the display and repeat mode is cancelled.

9