Getting started
Step 1: Charging the battery pack
Battery pack
DC IN jack | ACCESS lamp |
| |
DC plug |
|
| |
| (hard disk) | /CHG lamp | |
AC Adaptor | Power cord (mains lead) |
| |
|
| To the wall outlet | |
|
| (wall socket) |
You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your camcorder.
You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder.
1 Turn off your camcorder by closing the LCD screen after replacing the viewfinder.
2 Attachclicks. the battery pack by sliding it in the direction of the arrow until it
3 Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket).
Align the mark on the DC plug with that on the DC IN jack.
The /CHG lamp lights up and charging starts. The /CHG lamp turns off when the battery pack is fully charged.
4 When the battery is charged, disconnect the AC Adaptor from the DC IN jack of your camcorder.
See page 119 on recording and playing time.
Contents of Table
Techniques Recording Useful
Index
18