Once the clock is set, the clock time is automatically adjusted with [AUTO CLOCK ADJ] and [AUTO AREA ADJ] set to [ON] (p. 96). The clock may not be adjusted to the correct time automatically, depending on the country/region selected for your camcorder. In this case, set [AUTO CLOCK ADJ] and [AUTO AREA ADJ] to [OFF]
To turn off the power
Close the LCD screen. The (Movie) lamp flashes for a few seconds, and the power is turned off.
POWER
You can turn off your camcorder also by pressing POWER.
If the viewfinder is pulled out, retract the viewfinder as shown in the illustration below.
On turning the camcorder on or off using the LCD screen or the viewfinder
The power of the camcorder is turned on or off depending on the status of the LCD screen or the viewfinder.
| Status | Power of the | |
LCD screen |
| Viewfinder | camcorder |
Open |
| Retracted | On |
|
| Pulled out | On |
Closed |
| Retracted | Off |
|
| Pulled out | On |
Notes
Even if the LCD screen is closed, if the viewfinder is pulled out, the camcorder is not turned off. When you turn off the power of the camcorder, make sure that the viewfinder is retracted to the original position.
Changing the language setting
You can change the
Touch (HOME) (SETTINGS) [CLOCK/LANG] [LANGUAGE SET]
a desired language .
Contents of Table
Techniques Recording Useful
Index
22