Cannot use

Because of following settings

[FRAME

NightShot, [SMTH SLW

SETTING]

REC]

[SCENE

NightShot, LOW LUX,

SELECTION]

[FADER], [TELE MACRO]

Self-diagnosis display/Warning indicators

If indicators appear on the LCD screen or viewfinder, check the following.

If the problem persists even after you have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility.

C: (or E:) :(Self-diagnosis display)

C:04:

The battery pack is not an “InfoLITHIUM” battery pack (H series). Use an “InfoLITHIUM” battery pack (H series) (p. 129).

Connect the DC plug of the AC Adaptor to the DC IN jack of your camcorder securely (p. 18).

C:13:/ C:32:

Remove the power source. Reconnect it and operate your camcorder again.

E:20:/ E:31:/ E:61:/ E:62:/

E:91:/ E:94:/ E:95:/ E:96:

A malfunction that you cannot service has occurred. Contact your Sony dealer or local authorized Sony service facility. Inform them of the 5-digit code, which starts from “E”.

101-0001 (Warning indicator pertaining to files)

Slow flashing

The file is damaged.

The file is unreadable.

(Warning on the hard disk of the camcorder)

Fast flashing

The hard disk of the camcorder is full.

An error may have occurred with the hard disk drive in your camcorder.

(Battery level warning)

Slow flashing

The battery pack is nearly used up.

Depending on the operating environment or battery conditions, may flash, even if there are about 20 minutes remaining.

(High temperature warning)

Slow flashing

The temperature of your camcorder is getting higher. Turn off your camcorder and leave it for a while in a cool place.

Fast flashing

The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.

(Low temperature warning)

Fast flashing

The temperature of your camcorder is extremely low. Make the camcorder warm.

(Warning indicator pertaining to “Memory Stick PRO Duo” media)

Slow flashing

Free spaces for recording images are running out. For the type of “Memory Stick” media you can use with your camcorder, see page 70.

No “Memory Stick PRO Duo” media are inserted (p. 70).

Fast flashing

There are not enough free spaces for recording images. After storing the images on other media (p. 67, see Operating Guide too), delete unnecessary images, or format the “Memory Stick PRO Duo” media (p. 72).

Contents of Table

Techniques Recording Useful

Index

115