CLOCK/LANG (Items to set clock and language)
The default settings are marked with .
CLOCK SET
See page 21.
AREA SET
You can adjust a time difference without stopping the clock. Set your local area when using your camcorder in other time zones. Refer to the world time difference on page 123.
Steps
(HOME) (SETTINGS) [CLOCK/LANG] [AREA SET] set your local area using /
AUTO CLOCK ADJ
Your camcorder will maintain the correct clock time by acquiring the time from GPS. Set the GPS switch to ON in advance.
Steps
(HOME) (SETTINGS) [CLOCK/LANG] [AUTO CLOCK ADJ] a desired setting
| ON | Adjusts the clock automatically. |
| OFF | Does not adjust the clock automatically. |
Notes
You must set the date and time on your camcorder before using your camcorder (p. 21).
There may be discrepancies of a few seconds even if [AUTO CLOCK ADJ] is activated.
The clock is adjusted automatically by [AUTO CLOCK ADJ] when you turn off your camcorder if the camcorder is receiving a GPS signal while it is being used. The clock is not adjusted until the camcorder is turned off. Also, the clock is not adjusted unless the camcorder is receiving a GPS signal, even if the GPS switch is set to ON.
AUTO AREA ADJ
Your camcorder will compensate for a time differences with the current area automatically when it detects a time difference, by acquiring the current location information from GPS. Set the GPS switch to ON in advance.
Contents of Table
Techniques Recording Useful
Index
96