Moving recorded tracks (Move Function) (continued)
4 Turn the jog dial to select the new track position, and press YES•ENTER. “003ttt001?” appears in the display.
If you want to cancel the move function at this point:
Press NO•CANCEL or MD x.
5 Press YES•ENTER.
“Complete” appears in the display for a few seconds after the track is moved.
Note
After you stop editing, do not disconnect the mains
lead or move the player while “TOC EDIT” is flashing in the display. If you do so, editing
may not be done properly.
Labelling recordings
(Name Function)
Either during recording or after recording, you can label the MDs and the tracks you have recorded with letters, numbers and symbols. You can input up to about 1 700 characters into each MD.
MD x K, k
DISPLAY
Jog dial
DEL
YES
ENTER
NO EDIT
CANCEL
Labelling during recording
•You can label both MDs and tracks during synchronized recording of a whole CD (page 6) or the tracks you programmed (page 20).
•You can only label the tracks during synchronized recording of a single track – REC IT (page 19).
During synchronized recording of a whole CD or the tracks you programmed
You can label an MD or a track with up to 40 characters. You can label up to 25 tracks. If you want to label more than 25 tracks, label the tracks after recording (page 32).