Dividing recorded tracks
(Divide Function)
YES MD u
ENTEREDIT
When recording from the radio, etc., track marks may not be added correctly. A number of tracks may be included in a single track. You can divide these tracks into separate tracks, and add a new track mark to each track. All tracks following the divided tracks are renumbered.
Tips
•To put the divided tracks together, see “Combining recorded tracks” on page 48.
•To divide a track during recording, press REC/REC MODE at the point where you want to add the track mark.
Note
If “Sorry” appears in the display, you cannot divide the track.
If you repeat editing on the MD, you may not be able to divide a track. This is due to the system limitations of the MD (page 73), but not caused by mal- function.
Example: Dividing track 1 into three tracks
Track |
|
| |||
number |
| 1 | 2 | ||
|
|
|
|
|
|
|
|
| A B C |
| D |
|
|
|
|
|
|
Dividing
Track 1 is divided, and the track marks 2 and 3 are added.
1 | 2 | 3 | 4 | ||
|
|
|
|
|
|
| A | B | C |
| D |
|
|
|
|
|
|
1 While playing the MD, press MD uat the point where you want to create a new track.
The player pauses.
2 Press EDIT repeatedly until “Divide” appears in the display.
3 Press YES•ENTER.
“Divide OK?” appears in the display.
If you want to cancel the divide function at this point:
Press NO•CANCEL or MD x.
46GB Editing recorded tracks on the MD