REMOTE CONTROL LEARNING MODE CONT.
Erasing a Learned Command From a Button
Step 1.
Press the Device button and SELECT buttons simultaneously and hold until the orange Status LED and the Device button turn on and remain lit.
Step 2.
On the remote control, press the button that is to be erased. The orange Status LED will flash continuously and the Device button will turn off.
Step 3.
Press the LIGHT button. The green status LED will flash twice, then turn to a steady orange. The Device button will turn on.
Repeat From Step 2 for any other buttons to be erased in the selected Device mode.
Step 4.
To exit this feature, press and hold the Device button and the SELECT button simul- taneously once again. The orange Status LED will flash twice and then turn off. The Device button will turn off.
Erasing All the Learned Commands in One Device Mode
Step 1.
Press the Device button and SELECT buttons simultaneously and hold until the orange Status LED and the Device button turn on and remain lit.
Step 2.
Press and hold the LIGHT button. The red Status LED will flash five times. Release the LIGHT button. The Status LED will then flash green twice and then the Device button will turn off. The Status LED will go to a constant orange indicating that all the learned infor- mation on buttons in the Device mode have been erased. The Device button will turn on.
Step 3.
To exit this feature, press and hold the Device button and the SELECT button simul- taneously. The orange Status LED will flash twice and then turn off. The Device button will turn off.
Erasing All of the Learned Commands in All Device Modes
Press and hold the TV Device button and the LIGHT button simultaneously. The red Status LED will flash continuously. The Status LED will then flash green once, orange once and then turn off, indicating that all of the learned commands on all of the Device modes on the remote control have been erased.
Warning: This procedure will erase all learned commands on all buttons
in the CD, DVD, AUX, SAT, TV, VCR and CBL device modes.
© 2002/2003 bel canto design, Ltd. | Page 28 | PRePro User’s Guide rev1103 |
