| Troubleshooting Guide |
| |
|
|
|
|
|
|
|
|
| Trouble Shooting the Basics |
|
|
| PROBLEM | SOLUTION | |
| NO sound, LED is OFF | Check if AC power cord is securely plugged in. | |
|
| Check AC power fuse, replace if necessary. | |
| NO sound, LED is ON | Check all RCA cables for proper connections. | |
|
| Verify correct source is selected. | |
|
| Verify power amplifiers are turned on. | |
|
|
| |
| NO remote control function and LED is OFF | Press Power button on the front panel. | |
|
| Verify the Status LED is ON. | |
|
|
| |
| NO remote control function and Status LED is ON | Press AVC button on remote first. | |
|
| Check to ensure batteries are installed. | |
|
| Check if the IR receiver path is blocked by obstacles. | |
|
|
| |
| All functions work except in tuner mode | Check if antenna cables are properly connected. | |
|
|
| |
| Audio path works fine but the video signal | Verify that all video and audio connections | |
| does not correspond to the program source or | correspond to the correct source legend on vice versa. | |
| the rear panel. |
|
|
|
|
|
|
© 2002/2003 bel canto design, Ltd. | Page 33 | PRePro User’s Guide rev1103 |
