Digital Source Set-up & Connection
This section describes how to connect a digital audio or video source, such as DVD, DISH, SAT, GAME, CABLE BOX. We will use the SAT INPUT and a satellite receiver as an example for this instruction.
1.Using high quality video cable connect the COMPONENT VIDEO OUT from the satellite receiver to the SAT COMPONENT VIDEO IN. Also connect a
2.With a high quality optical conduit or coaxi- al cable, connect the digital OUTPUT of the satellite receiver to a digital INPUT on the PRePro.
3.Turn on monitor and make sure the master power switch on the left side of PRePro is pressed in.
4.Press the SAT input key on the front panel of the PRePro or provided remote control. This will turn the unit on.
7.In the AUDIO INPUT menu SAT should be set to the corresponding digital input.
© 2002/2003 bel canto design, Ltd. | Page 17 | PRePro User’s Guide rev1103 |