Compression
This utility is used to limit and narrow the dynamic range of the output signal. Use this option to enhance dialog when listening at low levels or to limit the difference between quiet and loud segments of a broadcast feed or video.
This feature is not recommended for consistent use for compression significantly reduces over- all fidelity.
1.From MAIN MENU press selection 7.
2.Press SELECT to toggle between the On or Off setting.
3.Press EXIT to get back to the main menu.
1 | QUICK SETUP | SPEAKER SIZE |
2 | QUICK SETUP | SPEAKER DIST |
3 | INPUT ASSIGNMENT |
|
4 | TUNER/PAL/NTSC SETTING | |
5 | BASS TRIM |
|
6 | CALIBRATION |
|
7 | COMPRESSION | OFF |
8 | STATUS DISPLAY | ON |
9 | DVD AUDIO FULLRANGE | NO |
0 | RESET TO DEFAULTS | NO |
EXIT
Status Display
The STATUS DISPLAY is set to automatically appear upon pressing a function such as VOLUME or an INPUT button. This will display the current status of the PRePro on both the PRePro display and the S or composite video output.
Status display cannot be set to OFF on the PRePro.
The STATUS DISPLAY can be manually accessed by pressing the GUIDE button to the right of the display.
1 | QUICK SETUP | SPEAKER SIZE |
2 | QUICK SETUP | SPEAKER DIST |
3 | INPUT ASSIGNMENT |
|
4 | TUNER/PAL/NTSC SETTING | |
5 | BASS TRIM |
|
6 | CALIBRATION |
|
7 | COMPRESSION | OFF |
8 | STATUS DISPLAY | ON |
9 | DVD AUDIO FULLRANGE | NO |
0 | RESET TO DEFAULTS | NO |
EXIT
© 2002/2003 bel canto design, Ltd. | Page 11 | PRePro User’s Guide rev1103 |
