RECORDING AUDIO AND VIDEO
NOTE: You must connect the analog, video or digital output of all sources you want to record to the PRePro.
1.RECORD OUT on back of PrePro can be used to record any selected input provided the source is connected to the analog input.
2.To record a selected input connect a high quality
3.Connect high quality RCA audio cables from the analog AUDIO OUT L and R of the RECORD OUT of the PRePro to the ana- log RCA AUDIO input L and R of the VCR.
4.To record digital audio connect a digital out to your digital recorder. The PRePro’s digital information out will be the same as the digital source information.
NOTE: There is no downmix from an
To Change Input Assignment To Analog
1.Press the MENU button on the front panel of the PRePro or remote control and the main menu will show on the monitor.
2.From MAIN MENU press selection 3.
3 Press 1, VCR1 assignment will blink.
4.To change to ANALOG setting, press SELECT button repeatedly until VCR1 input assign- ment scrolls to ANALOG.
5.Press EXIT to store settings and return to
MAIN MENU.
INPUT AUDIO |
| |
1 | VCR 1 | DIG 8 |
2 | VCR 2 | DIG 7 |
3 | TV | DIG 6 |
4 | LD | DIG 5 |
5 | AUX | DIG 4 |
6 | SAT | DIG 3 |
7 | DVD | DIG 2 |
8 | CD | DIG 1 |
9 | TAPE | ANALOG |
EXIT
© 2002/2003 bel canto design, Ltd. | Page 20 | PRePro User’s Guide rev1103 |