Bel Canto Design PReProTM Video Monitor Connection, Component In, Composite In, Component Out

Video Monitor Connection

The main video out section accommodates 1- Component, 1-S and 2-Composite connectors. The Component connection will only output video from each of the three component inputs. S-Video inputs can be viewed from the S output or composite outputs since the PRePro will down mix S to COMPOSITE. The programming MENU can be viewed from S-Video or Composite video output. For best video quality use component or S-Video connections when available. The PRePro front panel monitor only accepts a composite input for this monitor to

display a video input. You must connect an S or composite video input signal from the video source.

1.Connect the COMPONENT VIDEO OUT of the PRePro to the COMPONENT VIDEO IN of your monitor.

2.Connect S output to the monitor if any input source is using an S-Video input. If a source is using a COMPOSITE input, use the composite video out to connect to the monitor.

COMPONENT IN COMPOSITE IN COMPONENT OUT

S-VIDEO IN COMPOSITE OUT S-VIDEO OUT

© 2002/2003 bel canto design, Ltd. Page 15 PRePro User’s Guide rev1103