REMOTE CONTROL LEARNING MODE CONT.
Example for Programming a Macro Sequence
To program the M1 button in the AVC mode to power on the receiver, power on the CD, power on the TV and power on the VCR:
Step 1.
Press the AVC button and MUTE buttons simultaneously. Hold both buttons until the red light under the AVC button turns on. The red light will blink once during each subse- quent press of a button.
Step 2.
Press the M1 button to select the M1 macro.
Step 3.
Programming the M1 macro button: Press the AVC button to select the AVC Power command. Press the CD Device button to select the CD mode. Press the MUTE button to select the CD Power command. Press the TV Device button to select the TV mode. Press the MUTE button to select the TV Power command. Press the VCR Device but- ton to select the VCR mode. Press the MUTE button to select the VCR Power command.
Step 4.
Press the CH button. The red light under the AVC button will blink twice and then turn off indicating that the macro sequence has been stored.
© 2002/2003 bel canto design, Ltd. | Page 30 | PRePro User’s Guide rev1103 |
