Preparing the system (continued)
Tip
The sound quality may be changed depending on the polarity of the mains plug. Change the direction of inserting the plug and check the sound quality.
3Connecting the mains lead
Insert one end of the supplied mains lead to the AC IN socket located at the rear of the player, and the other end to the mains.
About the demonstration mode
The player enters the demonstration mode about 10 seconds after you connect the mains lead to the mains outlet. Demonstration indications such as “DEMONSTRATION” and “PERSONAL MD SYSTEM
The player also enters the demonstration mode if you do not operate the player for about one minute after you turned it on.
To exit the demonstration mode, set the clock of the player (page 57).
4Inserting batteries into the remote
Insert two R6 (size AA) batteries (not supplied)
Replacing batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones.
66GB Setting Up