Advanced operations
See page 23 for button locations.
7DSP
STADIUM
STADIUM mode adds clarity and spreads the sound, like in an outdoor stadium.
All Channel Stereo
All Channel Stereo (ALL ST) mode can reproduce a larger stereo sound field using all the connected (and activated) speakers.
All Channel Stereo can be used while reproducing 2 channel stereo source.
Normal stereo sound | All Channel Stereo | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7Indicators on the display window
Digital signal format indicators
LPCM: | Lights when Linear PCM signal comes in. |
GD: | Lights when Dolby Digital signals come in. |
C: | Lights when DTS Digital (Surround) signals come |
| in. |
No indication: No digital signal indicator lights when analog | |
| signals come in. |
Dolby Surround mode indicator | |
GPLII: | Lights when Dolby Pro Logic II mode is activated. |
Surround indicator | |
SURR: | Lights when the surround mode is activated. |
Selecting the surround mode
The system is set up to automatically select the optimal surround mode for input signal from digital multichannel software.
When playing back a 2 channel source, you can select the desired surround mode manually.
IMPORTANT
Before using the remote control for the following operation;
• Set the remote control mode selector to AUDIO.
7When playing back digital multichannel
software (except while OFF is selected)
The appropriate multichannel surround mode (Dolby Digital or DTS Digital Surround) is automatically selected.
7When playing back a 2 channel source
You can select either Dolby Pro Logic II (MOVIE/MUSIC) or the DSP mode.
Press SURROUND repeatedly to select the desired mode.
The surround mode is turned on and the current surround mode appears on the display window.
Each time you press the button, the surround mode changes.
For details on each mode, see “Available Surround modes for each input signal”. (See page 23.)
To turn off the surround mode
Press SURROUND repeatedly until “OFF” appears on the display window.
Storing adjustments — auto memory
Source signal indicators, etc. Light to indicate the incoming signals. a: Lights when the left channel signal comes
in.
b: Lights when the center channel signal comes in.
c: Lights when the right channel signal comes in.
d: Lights when the LFE channel signal comes in.
g: Lights when the surround left channel signal comes in.
i: Lights when the surround right channel signal comes in.
h: Lights when the monaural surround channel signal or 2 channel Dolby Surround signal comes in.
SW (Subwoofer): Always lights.
The channel with “ 
” shows that the corresponding speakers are reproducing the channels’ sound.
If the channels’ sound decoded into 5.1 channel is reproduced, only “ 
” lights.
When you turn the power off, the system memorizes the current surround mode. The memorized mode is automatically recalled when you turn the power on.
NOTE
•For ASF,
24
