Tuner operations
IMPORTANT
Before using the remote control for the following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
The buttons described below are used on pages 36 and 37.
Number 
buttons
Remote control mode selector
Cursor (3/2)
Manual tuning
On the remote control:
1Press FM/AM repeatedly to select the band.
Example:
When the system is tuned in to 810 kHz.
2Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts searching for stations and then release it, the system stops searching automatically when a station of sufficient signal strength is tuned in to.
On the center unit:
1Press SOURCE repeatedly to select the band (FM or AM).
2Press TUNING +/– repeatedly until you find the frequency you want.
NOTE
•When an FM stereo program is received, the ST indicator lights on the display window.
36
