JVC TH-C40, TH-C60 manual Tray lock, Sound and other settings, Repeating a desired part A-B Repeat

Advanced operations

See page 23 for button locations.

Repeating a desired part [A-B Repeat]

You can repeat playback of a desired part by specifying the beginning (point A) and ending (point B).

7 During playback

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2 to highlight . 3 Press ENTER.

4 Press Cursor Y/5 repeatedly to select “A-B”.

5 Press ENTER at the beginning of the part you want to repeat (point A).

The repeat mode indicator “ ” appears on the display window.

6 Press ENTER at the end of the part you want to repeat (point B).

The repeat mode indicator on the display window changes to

“ ” and A-B Repeat Playback starts.

7Press ON SCREEN.

The on-screen bar disappears.

To cancel

Select “OFF” in step 4, then press ENTER.

NOTE

•When playing back a DVD VIDEO, A-B Repeat Playback is possible only within the same title.

•When playing back a VCD, SVCD, or CD, A-B Repeat Playback is possible only within the same track.

•“A-B” cannot be selected during Program and Random Playback.

•“A-B” cannot be selected during playback with PBC function.

Tray lock

You can lock the tray and prohibit unwanted disc ejection.

On the center unit ONLY:

While the system is turned off

Press and hold

•“LOCKED” appears on the display window.

•If you try to eject the disc, “LOCKED” appears to indicate that the tray is locked.

To cancel

Carry out the same operation again.

• “UNLOCKED” appears on the display window.

Sound and other settings

IMPORTANT

Before using the remote control for the following operation;

• Set the remote control mode selector to AUDIO.

NOTE

• Before you start operation; There is a time limit when

doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1 Press SETTING.

Example:

2Press Cursor Y/5 to select the item you want to set.

•BAL. (Balance):

You can adjust the balance of the sound between “R (right) – 21” and “L (left) –21”. To set the balance to normal, select “CNTR (center)”.

•MON. (Monitor Out):

Select the video output jack type by which you watch DVD playback after connecting your TV. (See page 12.) Set the video output to use AV COMPU LINK remote control system. (See page 38.)

VIDEO: To watch DVD playback via the VIDEO jack.

S:To watch DVD playback via the S-VIDEO jack. COMP (Component):

To watch DVD playback via the COMPONENT

VIDEO OUT jacks.

HDMI: To watch DVD playback via the HDMI

MONITOR OUT terminal.

When selecting this setting, AV COMPU LINK remote control system does not work.

3 Press Cursor 3/2 to make an adjustment or selection.

Example:

The adjustment is set and the display automatically disappears a few seconds later.

32