JVC TH-C60, TH-C50 Program Playback, Advanced operations, Changing the VFP setting, Press VFP

Advanced operations

See page 23 for button locations.

Changing the VFP setting

The VFP (Video Fine Processor) function enables you to adjust the picture character according to the type of programming, picture tone or personal preference.

7 During playback

1 Press VFP.

The current VFP settings appear on the TV screen.

Example:

2Press Cursor 3/2 repeatedly to select the VFP mode.

•NORMAL: Normally select this.

•CINEMA: Suitable for movies.

When you select “NORMAL” or “CINEMA”, press VFP to complete the setting.

•USER 1 and USER 2: You can adjust parameters that affect picture appearance.

Only when selecting “USER 1” or “USER 2” in step 2, proceed to perform the following operation;

3Press Cursor Y/5 repeatedly to select

a parameter you want to adjust.

Adjust gradually and confirm picture appearance results are as preferred.

•GAMMA:

Controls brightness of neutral tints while maintaining brightness of dark and bright portions.

•BRIGHTNESS:

Controls screen brightness.

•CONTRAST:

Controls screen contrast.

•SATURATION:

Controls screen color depth.

•TINT:

Controls screen tint.

•SHARPNESS:

Controls screen sharpness.

4Press ENTER.

Example:

5 Press Cursor Y/5 to change the setting.

6 Press ENTER.

The current VFP settings appear again.

7 Repeat steps 3 to 6 to adjust other parameters.

8 Press VFP.

Program Playback

7 While stopped

1 Press PLAY MODE repeatedly until program window appears on the TV screen.

PRG indicator lights on the display window.

2Follow the instructions that appear on the TV screen to program the desired chapters/tracks.

•For details on using the number buttons, see “How to use the number buttons”. (See page 22.)

•The content’s numbers that you have to specify for programming varies depending on the disc/file type:

–DVD VIDEO: Titles and chapters

–VCD, SVCD, CD: Tracks

–MP3, WMA: Groups and tracks

•You can specify the chapters/tracks whose number is up to 99.

•There may be a case that the group or title number can be entered even for discs that contain no groups or titles. In such a case, press ENTER to proceed to the Track/Chapter column.

•When you press ENTER instead of the number buttons in the Track/Chapter column, “ALL” appears and all the tracks or chapters on the selected group or title are programmed as a step.

To clear the programs one by one from the last entered number

Press CANCEL repeatedly.

To clear all programs

Press 7.

You can also clear the program by turning off the system.

3 Press 3 (play button).

If all of the programmed tracks/files have been played back, playback stops and the program window appears again. Note that program setting remains.

To check the program contents

During playback, press 7. Playback stops and the program window appears.

To quit the Program mode

While stopped, press PLAY MODE repeatedly until both program

window and disappear from the TV screen.

NOTE

•When the source is USB MEMORY, Program Playback does not work.

•The Resume function cannot be used with Program Playback.

•DISC (1-5)on the remote control and DISC (1-5) 3 on the center unit do not work during Program Playback.

•Program Playback may not work for some discs.

NOTE

•Although the setting display disappears in the middle of the procedure, the setting at that time will be stored.

30