Partial lighting 1
O
A B C D E F G
Partial lighting 2
O
AGING MODE
•Mode which repeatedly changes and plays back discs automati- cally in the unit.
•It will repeat aging as long as no errors occur.
•If an error occurs during aging, it will stop all servos, motors, etc. instantaneously, display the error number, and stop opera- tions. However, the stopping conditions differ according to whether the unit is equipped with the
The function serves to maintain the state of the unit when errors occur.
Partial lighting 3
O
2nd
**
*: Counter displayed
Test Points Location:
[MAIN BOARD] – Component Side –
IC502
TP
(AFADJ)
TP |
| IC506 |
(ADJ) | IC501 | |
|
|
CN509CN508
Sequence of Aging Mode
$
1. Disc change
$
2. Load in
$
3. TOC read
$
4. Access of last track
$
5. 3 second playback
$
6. Access of first track
$
7. 3 second playback
$
8.Load out
$
Order of Disc Change
(1 cycle takes 3 minutes)
$
1. No. 40
$
2. No. 120
$
3. No. 80
$
4. No. 200
$
5.No. 160
$
Special Functions in Aging Mode
1.Disc setting mode:
5 discs are set before setting the aging mode. This mode makes the setting of these discs more easy.
2.Self protection function during errors:
Function which voluntarily corrects errors which occur dur- ing normal operations by retries.
If this function is not provided, all operations will be stopped without retiring. It is suitable for checking errors with low re- producibility.
If this function is provided, and errors can be corrected by retries, aging will be continued without stopping.
3.Aging cycle count function:
Functions which displays the number of agings carried out on the Fluorescent indicator tube in numbers. One aging cycle consists of five discs.
number of agings
1DISC | 2 |
CD1 | |
DISC |
|
