6-2 DFP-3000
6.3b Link the channel mutes to the channel selects
using the Tools selection of the main screen and
selecting Link Mute Channels to Channel
Select.
6.3c To bring up the DFP Test Signal Generator
screen, select the Signal Generation option under
the Test item on the main screen menu bar.
6.4a Select Pink Noise in the Signals area. Pink noise
can be sent to the outputs only at _20 dBFS. This
is handled automatically by the software.
6.4b Enable all outputs by selecting All On in the
Output Channel area. The software automatically
mutes all channels to prevent accidentally sending
loud sounds into the theatre.
When All On is selected, a warning will appear.
Read it carefully and select Yes if you wish to
continue.
When you finish the setup, return to the main
screen by pressing Exit.
Note that the bottom of the main screen now
shows PINK to indicate that pink noise is being
generated and Linked to show that channel mutes
are linked to channel selects.