Sony Ericsson DFP-D3000, DFP-R3000 - page 41

9-7
DFP-3000
2. Setting of output preset corresponding to AUX1 or AUX2
The following shows an example of the settings of the Preset Configuration screen of the setup software.
For this example, signals from the existing system are connected to the AUX1 input.
With this system configuration, set the Fallback of the AUX input to the AUX input itself. (In other
words, no Fallback operations. Details are as shown at (1) of the following setting example.) Set the EQ
of the AUX input to OFF, and use an equalizer which has been adjusted at the existing system side. Set
Surround Delay in the same way. (Details are as shown at (2) of the following setting example.)