2-1
DFP-3000
2. Equipment and accessories
Your purchase of a DFP-3000 system includes the following items in two boxes:
In the Reader box you will find :
2.1 Digital Film Sound Reader Unit 1 DFP-R3000
Reader-to-Decoder Cable, 10 meter*1 1-783-382-11
Adapter EA 1 3-194-819-03
Spacers 4
Bolt, Hex 3/8” 4 3-185-981-01
Washer 10 4 7-688-000-32
Screw, Hex 4 x 12 5 7-683-421-04
Washer 4 5 7-688-004-12
Spring Washer 4 5 7-623-210-22
2.2 In the Decoder box you will find:
Film Sound Decoder Unit 1 DFP-D3000
AC Power Cable 1 Varies by Country
Plug Holder 1 Varies by Country
AC Adapter (backup supply) 1 Varies by Country
Operation Manual 1 3-862-212-02
2.3 Personal equipment you will need:
Personal computer (laptop) running Windows 3.1 or later 486-66 with 32 Mb RAM, Floppy
drive, serial port, 20 Mb available disk
space.
Pentium 120+ MHz recommended
Null modem cable, RS232C With 9-pin male on D3000 end
Real Time Analyzer With calibrated microphone (s)
Oscilloscope 2-Ch, 10 MHz minimum
Allen wrench set, ANSI Up to 3/8-inch
Allen wrench set, Metric Up to 6 mm
Tweaker (small straight slot screw driver)
2.4 The following additional equipment is available from Sony:
Connector kit Free STK-2202
Setup Software Free STK-2233
Test Film Kit Contact Sony
#1 JIS screwdriver, cross point type 7-700-749-03
Reader-to-Decoder Cable, 50 meter*1-783-896-11
*Neither the 10 meter nor 50 meter cable can be cut, spliced, or re-pinned.