Sony Ericsson warranty Tools/Parts Needed, S40 mode for the DSC-S600 camera

How to hardwire the Sony DSC-S600 Digital Camera

Copyright, PixController http://www.PixController.com, all rights reserved.

This document covers in detail how to modify the Sony DSC-S600 digital camera for remote shutter control from the PixController Universal or LE camera control board. Please see http://www.pixcontroller.com or email support@pixcontroller.com for more information.

Please note that if you make this modification to your Sony camera that you will void your camera’s warranty. This modification can also result in damage to your digital camera if you do not follow the instructions properly.

Tools/Parts Needed

1.2.4 mm #0 Philips Screwdriver & Small Flat Blade Screwdriver.

2.Fine tipped soldering iron with heat control.

3.30 Gauge wire. Wire Wrap type wire can be purchased from your local Radio Shack store. Find one of the 3 part numbers: 278-501, 278-502, 278-503. They come in a spool of 50 feet of wire for $2.99

4.Small tweezers.

5.Flat blade screw driver or knife.

6.PixController Universal board with Sony S40-U PIC chip, or LE board with LE II PIC chip (Use the Sony DSC-

S40 mode for the DSC-S600 camera)