White Paper J200
Feature | Support in the J200 WAP browser | |
|
| |
WAP profiles | 5 WAP profiles, each with its own settings | |
|
|
|
WTLS (security) | Yes, |
|
| WTLS Class 1 | - Encryption |
| WTLS Class 2 | - Encryption + Server Authentication. Root Certificates |
| needed in phone | |
|
|
|
WAP operator technical data
Feature
Support for WAP in the J200
WAP Browser
Version | 1,21 baseline |
|
|
WAP Provisioning |
|
|
|
Total Parameter sets | 5 |
|
|
Parameter set list | Name |
| Startpage |
| IP settings: |
| CSD phone no., CSD Data rate, CSD dial type |
| GPRS APN, password request, allow calls, authentication, quality |
| of services |
| IP address |
| UserId and password |
| Security on/off |
| Show images on/off |
|
|
Manual selection | Yes, between Analog (V32) and Digital (V110) |
|
|
Parameter sets include | WAP/CSD, WAP/GPRS (different sets) |
|
|
Factory | WAP/CSD (possibility to lock a setting), WAP/GPRS |
|
|
OTA | WAP/CSD, WAP/GPRS configuration possible |
|
|
Simultaneous OTA | WAP/CSD, WAP/GPRS configuration possible |
|
|
Single OTA | one of WAP/CSD or WAP/GPRS configuration is possible |
|
|
Bookmarks | Not empty by default |
|
|
URL format | Underlined |
|
|
Security mechanism |
|
|
|
OTA provisioning (if empty) | Operator verification through a code, included in the OTA data. This |
| code is shown to the user who can choose installation or not. |
|
|
Interface (if empty) | An Install question is asked with the code, if available. |
| The user has to choose if a new WAP profile shall be created or an |
| existing profile shall be replaced. |
|
|
As above | |
|
|
Interface (Set 1 filled) | As above |
|
|
31 | November 2004 |
