1Press to release the cover as shown in the picture.

2 Gently pull the cover away from the phone.

3 Insert the SmartChip. Make sure the SmartChip is placed under the silvery holders.

4 Place the battery on the back of the phone with the label side up and the connectors facing each other.

5 Replace the cover as shown in the picture.

6 Press to close the cover.

To charge the battery

1 Connect the charger to the phone. The flash symbol 1 on the charger plug must face upwards.

2 It may take up to 30 minutes before the battery icon appears on the screen.

3 Wait approximately 4 hours or until the battery icon indicates that the battery is fully charged. If you do not see the battery icon after this time, press any key to activate the screen.

4Remove the charger by pulling it out.

The time and date are reset when you remove the battery.

7

This is the Internet version of the user’s guide © Print only for private use.

Page 8
Image 8
Sony Ericsson J220a manual To charge the battery