Sony Ericsson LBI-38965 installation manual BCU Functional Description, CAL Functional Description

LBI-38965

1.1. BCU FUNCTIONAL DESCRIPTION

The main function of the BCU is to generate call detail records (CDRs) to be transferred to an external billing system for invoice generation. To accomplish this, the BCU scans an input stream of activity messages supplied by the IMC, archives these messages in their raw form, uses those messages which indicate channel assignment and channel drop events to calculate air time, and then generates the CDR.

Call Types Supported

All EDACS call types except for the following are supported by the BCU:

1.Console calls.

2.Conventional site calls.

3.Local interconnect calls.

4.Non-EDG data calls.

1.2.CAL FUNCTIONAL DESCRIPTION

EDACS system administrators require both site monitor and activity download capabilities. These functions are normally supported by the System Manager in conjunction with the Site Controller at each Radio Frequency (RF) System. The CAL provides this capability for EDACS not equipped with a Site Controller.

1.Site Monitor

Provides the system operator at a System Manager terminal with a real-time display of the calls in progress on the RF channels at the selected trunked system.

2.Activity Download

Call activity and system status information are collected by the CAL and buffered in internal memory. Once an operator-defined buffer content threshold is exceeded, the CAL initiates a download of buffer contents to the System Manager. The downloaded information is used to prepare traffic reports on system usage.

In existing EDACS networks, the System Manager communicates with Site Controllers at RF systems using modems and dial-up or leased line connections, routed through a DECServer terminal server. A communications session is set up via a DECServer port between the System Manager and the Site Controller. The System Manager associates the DECServer physical port number with the Site Controller's identity.

Since the IMC is already connected to all the sites, it has centrally available much of the data that individual site controllers normally output to the system manager⎯for all the sites. The CAL connects to the IMC and demultiplexes incoming call activity information messages⎯the same messages that the BCU uses for billing⎯into activity download data and site monitor data to send to a system manager using site controller protocol.

The CAL uses two Internet Protocol (IP) terminal servers on the local area network (LAN) to communicate with the System Manager's DECServer(s). Up to 32 RS-232 asynchronous serial connections are available, 16 per terminal server. One System Manager DECServer port and one IP terminal server port are required per EDACS system being monitored by CAL.

Call Types Supported

All EDACS call types except for the following are supported by the CAL:

1.Console calls.

2.Conventional site calls.

3.Local interconnect calls.

4.Non-EDG data calls.

5