To reduce static noise during reception of a weak FM stereo station
Press FM MODE repeatedly until “MONO” appears in the display to switch the stereo reception to monaural.
To change the AM tuning interval
The AM tuning interval is factory set to 9 kHz (or 10 kHz for some areas; this function is not available on the European model).
1
2
3 While pressing and holding TUNE + on the main unit, press on the main unit.
All the preset AM stations are erased. To reset the interval to the factory setting, do the same procedure.
Notes on listening to the DAB service
When tuning in a DAB service, it may take a few seconds before you hear any sound.
Primary service is automatically received when secondary service ends.
Presetting radio stations or DAB services*
By presetting FM stations, AM stations or DAB services*, you can easily tune them in later merely by selecting the corresponding preset number. You can preset up to 20 FM stations or DAB services and up to 10 AM stations.
* For the UK model only
1 Turn in the desired radio station or DAB service (“Selecting a radio station or a DAB service” on page 32).
2 | Press TUNER MEMORY. |
|
|
3 | Press +/– to select a preset number, |
| and then press ENTER. |
|
|
4 | Repeat steps 1 to 3 to store other |
| stations or services. |
The preset stations or services are retained for about half a day even if you disconnect the power cord or if a power failure occurs.
To listen to the preset station or service
1 Press TUNER/BAND repeatedly to select “DAB”, “FM”, or “AM”.
2 Press TUNING MODE repeatedly until “PRESET” appears in the display.
3 Press +/– to select the preset station.
Tip
You can select the preset station using the numeric buttons on the remote control.
For example, when you select the station which preset number is 15, press 1 and 5, and then press ENTER.
If you enter unavailable preset number,
33GB