“Over Current” appears.

A problem has been detected with the level of electrical current from the (USB) port.

Turn off the unit and remove the USB device from the (USB) port. Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer.

There is no sound.

The USB device is not connected correctly. Turn off the unit, turn on the unit again, and then reconnect the USB device. Make sure that “USB MEMORY” lights up in the display.

There is noise, sound skipping, or distorted sound.

Turn off the unit, then reconnect the USB device.

The music data itself contains noise. Noise may have been introduced when creating music data due to the conditions of the computer. Create the music data again.

The USB device cannot be connected into the (USB) port.

The USB device is being connected backwards. Connect the USB device in the correct orientation.

“Reading” is displayed for an extended time, or it takes a long time before playback starts.

The reading process can take a long time in the following cases.

There are many folders or files on the USB device.

The file structure is extremely complex.

The memory capacity is excessive.

The internal memory is fragmented.

Thus, we recommend following these guidelines.

Total folders on USB device: 100 or less

Total files per folder: 100 or less

Erroneous display

Transfer the track to the USB device again, as the data stored in the USB device may have been corrupted.

The character codes that can be displayed by this unit are numbers and alphabet only. Other characters are not displayed correctly.

The USB device is not recognized.

Turn off the unit and reconnect the USB device, and then turn on the unit.

Connect the supported USB device (page 71).

The USB device does not work properly. Refer to the operating manual of the USB device for how to deal with this problem. If the problem persists, contact your nearest Sony dealer.

Playback does not start.

Turn off the unit, then reconnect the USB device, and the turn on the unit.

Connect the supported USB device (page 71).

Press USBto start playback.

Play does not start from the first track.

Set the play mode to Normal Play mode.

60GB