Sony Ericsson T18LX manual Operation, Ericsson, commercial, Receiving Data and Fax Calls

connector. Connect one end of the cable to your Ericsson mobile phone and the other end to the serial port on your computer.

RICSSOE NZ

SNOZ

ERIC

Note! If you are trying to connect to a 25-pin serial interface port on your computer, you will need an adapter. You can purchase a 25-pin serial interface port adapter at most computer supply stores.

	￿￿ Install Your Modem Control Software (driver)
	The modem control software (driver) that you need
	to use your Ericsson mobile phone is available on
		commercial
	the compact disc included in your DA 18 Phone
	Book Manager Accessory Kit. Refer to the Install-
	ing Your Modem Driver From Your Compact Disc
	section at the end of this chapter for help with
	installing drivers for some operating systems. When
	the appropriate driver is loaded, refer to the sections
	on making and receiving data and fax calls later in
	this chapter.
	￿￿ Set up your data access software according to the
	instructions supplied with it.
Not	for

	Operation			.
	Receiving Data and Fax Calls			Inc
		Ericsson
		When your phone and computer are properly set up,
		your phone will go into Data/Fax profile ( )as soon as
		your fax or file transfer software is started. You are then
		ready to receive data and fax calls. If you do not see the
		Data/Fax icon, refer to the Troubleshooting chapter.
		Review the instructions from your mobile service pro-
		vider that describe the procedures and rules for making
	– and receiving data calls in your area. If you are having
use		trouble receiving a data call, you may need to configure
		your phone manually to receive a data call. To configure
		your phone manually, do the following:
		￿￿ Set up your phone and computer as described
			above.
		￿￿ Press Ñ or Ô from the Standby screen to access the
			main menu.
		￿￿ Press Ñ or Ô until the PROFILES menu is high-
			lighted.
		￿￿	Press <(6 to open the PROFILES menu.
		￿￿ Press Ñ or Ô until the NextCallType submenu is
			highlighted.
		￿￿	Press <(6 to open the NextCallType submenu.
			The current selection is indicated by a filled radio
			button.
		￿￿	Press Ñ or Ô until the call type for the next call you
			will receive is highlighted.

Data, Fax, and Internet Calls 59