Sony Ericsson T61d, T61ds manual 72

WAP Browsing

Preparing Your Phone for WAP			Setting up a Data Connection
Before you can start using the WAP browser, you need to			1	Scroll to Browser, Select, WAP Settings, Select.
make sure that your access settings are set correctly. You			2	Select a WAP profile, Select.
need to set up your User ID and WAP Gateway address.			3	Access, Select, WAP Gateway, Select, User ID,
Depending on your network service provider, you can				Select.
			4	Enter the User ID to your WAP gateway, Select.
receive the access settings you need in different ways.
			5	Select Password, Select.		e
• When you buy your phone together with a WAP
			6
				Enter the password to yoursWAP gateway, Select.
subscription. Your service provider has already entered			7	Select IP Address, SelectU.
all the WAP settings you need.			8	Enter the IP addresslto your WAP gateway, Select.
• Manually. Your service provider will give you the					a
			An IP addressilooks something like this: 123.4.67.120.
settings you need. You can then enter them yourself.					c
					r
				Note!eAn IP address consists of four groups of digits,
Entering the WAP Settings Manually			m		with a maximum of three digits in each group.
The WAP settings you enter will be associated with one					If one of your digit groups consists of only one
		m			or two digits, you have to enter a zero (0) in
of the WAP profiles. If you want to use more than one
	o				front of the original digit for each digit that is
WAP profile, you need to specify the settings for each
	C				missing. For example, if you were to enter the
profile. See “Using WAP Profiles” on page 72.
	r				IP number above, 123.4.67.120, you should
Note! Please refer to the informationfoprovided by
					enter 123.004.067.120.
	t
your service provider before you enter your
settings.	o		You have now entered the settings you need to start
	N
			browsing the internet.

69