26 Calling
•Answer and reject calls using Voice
Answer feature and a portable or
vehicle handsfree.
Before voice dialing
•Verify the contacts you want to
record are included in your phone
contacts %
22 Contacts
.
•Activate the voice dialing function
and record your voice commands.
An icon appears next to a phone
number that has a voice command.
Tips when recording and using voice
commands
If your phone cannot detect your voice
command, one of the following might
have happened:
•You spoke too softly – try speaking
louder.
•You held the phone too far away –
hold it as you do during a call.
•The voice command was too short –
it should be around one second
long and more than one syllable.
•You spoke too late or too soon –
speak immediately after the tone.
•You did not record the voice
command when the handsfree
was attached – for voice control
with a handsfree kit, record when
the handsfree is attached.
•You used another intonation – use
the same intonation as in the
recorded voice command.
To activate voice dialing and
record names
Record names using the phone,
portable handsfree, or Bluetooth™
handsfree.
1} Settings } the General tab } Voice
Control } Voice Dialing } Activate
} Yes } New Voice Cmd. and select
a contact.
2If the contact has more than one
number, use and to view the
numbers. Select the number to add
the voice command to. Record a voice
command such as “John mobile”.
3Instructions appear. Wait for the tone
and say the command to record. The
voice command is played back to you,
if the recording quality is acceptable.
4If the recording sounds OK to you
} Yes. If not } No and repeat step 3.
To record another voice command for
a contact } New Voice Cmd. } Add
again and repeat steps 2-4 above.
Caller name
Hear your recorded contact name
when you receive a call from that
contact.
This is the Internet versi on of the user's guide. © Print only for private use.