Sound Performance Lab 9632 manual Midi Implementations, Selecting a MIDI channel, Info

Info 9 11. Selecting a MIDI channel:

Depress APPLY to step from channel 01 up to channel 16.

In order to increase operation safety only send the necessary MIDI data to the Loudness Maximizer. Unnecessary information might lead to system failure.

You can use MIDI to create a MIDI fade out, if you are working with a digital console that does not provide master inserts.The Up and Down LEDs illuminate indicating that a volume change command is received.

You can also switch between presets with the MIDI program change command. This can especially be useful, when you are mastering a song, for example, that requires different settings for chorus, refrain, or bridge. The Apply LED illuminates indicating that a program change command is received.

MIDI IMPLEMENTATIONS

	Function	Received Data	Note
Basic Channel:	Change	1-16	stored
Control Change:	7	1-127	Volume
Program Change:		0-99	real value

12.Adjusting the maximum output level:

In certain applications (i.e. recording to Sony Digital-Beta: - 2dBfs) it may be important to maximize loudness to a specific output level that is below the full scale level.The Output Level can be set to a lower level than 0dB. The default position is 0dBfs, which can be attenuated to -12dB in steps of 0.5dB.

You can change the Output Level in the INFO pages. Adjust the Output Level with the DESIRED GAIN encoder, which has to activated by depressing the Apply button first.

16 L o u d n e s s M a x i m i z e r